Publicité
ASSEMBLY
List of parts
Casters • Chair base • Pneumatic lift • Mechanism • Seat • Backrest • Armrests •
6 pcs M6x20 mm screws • 3 pcs M8x16 mm screws • 4 pcs M6x25 mm screws •
4 pcs M8 washers • 4 pcs spacers • Allen key 6 and 4
1.
4.
1.
Press the casters into the chair base.
2.
Insert the pneumatic lift into the hole in the chair base.
3.
Using the allen key, screw the armrests to the seat. Use 6 pcs of M6x20
mm screws (use M8 washers for the external screws).
4.
Screw the mechanism to the seat using M6x25 mm screws.
Place spacers between the seat and the mechanism.
5.
Using the allen key, screw the backrest to the seat with M8x16 mm
screws.
6.
Place the seat onto the cone of the pneumatic lift. Tighten the conical
connection by applying a one-time load to the seat.
2.
5.
EN
3.
6.
EN
1
Publicité
