Publicité
ASSEMBLY
List of parts
5 castors • Mobile base • Pneumatic Jack • Backrest with headrest • Seat with
mechanism • Armrests • 6 screws M6x20 • 3 washers M8 for backrest assembly •
4 washers M8 • 3 screws M8x16 • Allen key
1.
4.
1.
Wcisnąć kółka do podstawy krzesła
2.
Put the air jack into the hole of the chair base.
3.
Screw on the armrests using M6x20 screws. For R1 armrests, M8 round washers
should be used for the two outer bolts.
4.
Screw the backrest to the mechanism which is already placed in the
seat, using three M8x16 screws and three M8 washers.
5.
The seat with bolted-on backrest and armrests sits on an actuator that
is already in a base fitted with castors.
6.
Slide the headrest into the screwed handle. (HD Version).
2.
5.
3.
6.
HD
VERSION
EN
EN
1
Publicité
