System Settings - LENCO PDR-035 Manuel D'utilisation

SYSTEM SETTINGS

There are several system settings available for user to select their preference. Press and hold the INFO/MENU button to access the
menu control. Rotate the ENTER knob (or press the
Then rotate the ENTER knob (or press the
setup. To quit the menu control, press the MENU button repeatedly.
● Theme
● Night Mode
● Sleep
● Alarm
● Equaliser
● Time/Date
● Backlight
● Language
● Factory Reset
● Software Version
Theme
This is to change different display background colours.
Night Mode
It is to set the night mode duration. When the night mode is activated, the display will be dimmed.
Sleep Function
You can set the sleep timer function among off, 15, 30, 45, 60 and 90 minutes.
1. During the sleep timer count down, there is a moon icon shown on the display bottom area.
2. When the sleep timer is zero, the unit will be turned off automatically.
3. To cancel the sleep function, press and hold the
Alarm Setup (Only in Adaptor Charging Mode)
There are 2 alarms that can be set independently. Each alarm can be set as Daily, Once, Weekends and Weekdays. Alarm source can
be Buzzer, DAB + or FM. Finally alarm duration and alarm volume can be set.
To enable the alarm, set the alarm to be "On". To disable the alarm, set it to "Off".
When the alarm starts, press and hold the
Note:
The alarm function is available only when the unit is in adaptor charging mode.
-
When the unit is operated using built-in battery, the alarm setup cannot be done, because the time will not be memorized in
-
battery standby mode.
Snooze Function (Only in Adaptor Charging Mode)
Snooze function can be operated normally only when it is in adaptor charging mode.
You can activate the "Snooze" function by pressing the ENTER knob when the alarm starts. The alarm sound will be muted and you
can sleep for another short period of time according to the snooze time set. Press the ENTER knob repeatedly to set the snooze time
of 5, 10, 15 or 30 minutes. After the snooze time, the alarm will sound again. To stop the snooze function, press and hold the
STANDBY button.
Equaliser Operation
You can also enjoy different EQ sound presets. These EQ presets are Classic, Jazz, Pop, Rock, Speech and My EQ.
At My EQ Setup, Treble/Bass/Loudness can be configured manually.
or button) until "SYSTEM" is selected and then press the ENTER knob.
or button) for different selections as shown below. Then press the ENTER knob to
STANDBY button.
STANDBY button to stop the alarm.
10