CAME AGT V Manuel D'installation page 28

DOOR STATUS function
The system must be correctly set up.
ADVANCED FUNCTIONS
OPEN GATE and GATE STATUS function
Page 12 - Manual FA01620-EN - 08/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
> 3s
Use this function to view the current door status (open/closed) via the LED on the
The function is active during communication with the outside.
The open gate function is used to activate the open/close gate function and view the gate status
(open/closed) via the LED on the button.
The function must be activated during system programming.
The DOOR STATUS function is active by default. The OPEN GATE/GATE STATUS
function must be correctly confi gured. The two functions cannot both be active at the
same time.
Press and hold the button for more than 3 seconds to send an open or close gate
command.
button.