Publicité
Assembling the Left & Right Hands of Mr.Penguin
Insert the connecting rods of the Left & Right Hands of Mr.Penguin
(F & H) into the connecting holes at the sides of the Body of
Mr.Penguin (C) and fasten at two pairs of connecting loops with the
Zip Ties (V).
3
C
Assembling the Support Frame to Body of Mr. Penguin
Insert the upper half pipe of the Support Frame (U) with a ball
plunger into the locating hole of the lower half pipe to connect the
upper and lower pipes into one body.
Insert the top hooked end at the top of the Support Frame (U) into
the connecting hole at the top of the Body of Mr. Penguin (C).
Insert the movable connecting rod of the Support Frame (U) into the
vertical connecting hole at the middle of the Body of Mr. Penguin (C).
10
U
4
Assembling the
F
Neck Scarf &
Flowing Scarf and
D
Nose of Mr.Penguin
Insert the connecting
rods of the Nose of
Mr.Penguin (G) and
the Neck Scarf (E)
into the connecting
holes of the Head of
Mr.Penguin (B).
Insert the connecting rod of the Flowing Scarf (D) into the connecting
hole of the Body of Mr.Penguin (C).
5
J
K
G
B
C
I
11
Publicité
