Publicité
How To Operate Your Vehicle
(8) How to use the remote controller:
A. Unfasten the screws of seat and remove the seat
B. Slide the control mode switch to "R" position
C. Reinstall the seat and fasten the screws
During the "Remote Control Mode", the function of "Manual Control Mode" is disabled and the child cannot
control the car himself/herself ".
1. Powering off.
2. Remove the battery cover of remote controller, insert two AAA 1.5V batteries(See above photo)and the light of
remote controller will keep on.Replace the battery cover.
3.Press the "Frequency key "for 2 to 4 seconds, the indicator light of remote controller will blink.
4.Turn on the general power switch.
5. Matching the code.
6. Once the code is matched, there' s no need to match it again.
If new batteries are changed, act as instruction from1 to 4 to match the code again.
7. Push the left joy stick to the front ,the vehicle goes forward, push the left joy stick to the back, the vehicle
goes backward.
8. Push the right joy stick to the left ,the vehicle turn left, push the right joy stick to the right, the vehicle turn
Right.
9. Press the "stop"button, the vehicle drives stop.
10.Click "Speed controller",you can control the speed.
Warning: The remote control is not a toy. It is for the adult use only, and should not be used
by a child. A close adult supervision is always required. Reception range may change
significantly with weather, battery, and other environmental conditions.
(Pair code automatically, no need to operate any buttons.)
Publicité
