41902042GB.fm Page 17 Wednesday, June 22, 2011 10:28 AM
Appliance data plate
BRAND
USER ADVICE
Energy saving tips
For optimum results, observe the following advice:
• Use pots and pans whose bottom diameter is equal to
that of the cooking zone.
• Only use flat-bottomed pots and pans.
• If possible, keep pot lids on when cooking.
• Cook vegetables, potatoes, etc. with little water in
order to cut down cooking time.
• Use a pressure cooker to to save even more energy and
time.
• Make sure you place the pot or pan in the centre of the
cooking zone outlined on the hob.
Safeguarding the environment.
Packaging
The packaging material is 100% recyclable and marked
with the recycling symbol
Electrical Appliances.
This appliance is marked in compliance with European
Directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring that this appliance is
scrapped suitably, you can help prevent potentially
damaging consequences for the environment and health.
MODEL
• The symbol
Declaration of Conformity
• This hob is suitable for contact with foodstuffs and
• The appliances are designed solely for use as cooking
• The appliances are designed, built and sold in
IMPORTANT
Attach here one of the two appliance
data plate stickers found in the warranty booklet
17
SERIALNUMBER
on the appliance, or on documentation
enclosed with the appliance, indicates that this product
must not be treated as household waste, but must be
delivered to the nearest collection centre for the
recycling of electrical and electronic appliances. Disposal
must be carried out in accordance with local
environmental regulations for waste disposal. For further
information on the treatment, recovery and recycling of
this appliance, contact your competent local authority,
the collection service for household waste.
complies with EEC (CE) regulation n. 1935/2004.
appliances. Any other use (e.g. for room heating) is
considered as improper use and potentially dangerous.
compliance with:
• safety objectives of the "Low Voltage" Directive
2006/95/EC (which replaces 73/23/EEC and
subsequent amendments);
• Protection requirements of EMC Directive
2004/108/EC "Electromagnetic compatibility";
• the requirements of Directive 93/68/EEC.