Smartpond 52269 Mode D'emploi page 8

Step 1. To use the coupler,
connect the two extension
tubes with a coupler, skip to
step 4.
Step 2. Connect the
extension tubes to the
diverter valve. Make sure the
arrow is pointing up and the
diverter valve is connected
as shown.
Step 3. For the use of the
diverter valve, connect 1/2-in
ID tubing onto the second
output of the diverter valve.
Connect the other end of
tubing to a spitter or other
water feature.
NOTE: Tubing and spitter are
not included.
Step 4. Choose a fountain
nozzle for the desired water
effect, and assemble as
shown. Unplug pump before
proceeding.
Step 5. For pump model numbers 52428, 52529, 52277, 52496,
52280, 52497, 52279, 52498, 71142, 71143, 52652, 52672, 52671,
and 52670 use the 3/4-in adaptor and swivel adaptor to connect
the extension tubes to the outlet of the pump.
5 VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
1
1/2-in
tubing
2
3
4