Publicité
05
VERSION
2.2.5.
Fitting the thermostat
The thermostat can be placed in the cabinet or on the front or outside the cabinet. Its probe (S) must be placed towards
the air intake area (R). It is advisable to ensure that the end of the probe does not touch the bulkhead and is in the air
flow.
If the connecting cable is damaged, it has to be replaced by either the
producer, his after sale service or qualified people in order to avoid any
danger.
2.2.6.
Fitting the cover
The cover is inserted on the left at the notches and then screwed. The filtre cover is magnetic
WINEARM15X
R
S
29/10/2024
Page 25
Publicité
