Publicité
05
VERSION
2.2.2.
Fitting the air conditioner from above
In the case of a top installation, it is possible to disassemble the 4 rotary tabs used to hold the air
conditioner and to use the brackets supplied.
2
Integrate the air conditioner from the above in the
cutout
2.2.3.
Setting up the water flow
The air conditioner has a condensate evaporation system. However, there is an overflow through
which excess water can escape due to insufficient waterproofing of the cabinet or excessive open-
ing of the doors. It can be connected by means of a PVC pipe supplied to a container.
WINEARM15X
3
Fix the brackets with the supplied screws
29/10/2024
Page 23
Publicité
