Publicité
Power/Charging
Before using the speaker, you need to charge the battery and pair the speaker with a compatible device.
The package includes a Micro USB charging cable that can be connected to your computer or other device
made for USB charging. You can use a standard USB compatible charging device, or you can plug the USB
cable directly into a laptop or PC.
Caution: ONLY use computer USB output or standard 5 volt only (500mA minimum) power adaptor for
charging.
Damage may occur if non-standard USB power adaptor is used for charging. Do not charge if connector
and/or device is wet or damaged.
Power On/O
In power o mode, press and hold the Power On/O Button for about 2 seconds to power on the speaker,
you hear the opening tone.
To power o the speaker, press and hold the Power On/O Button for about 2 seconds again, you will hear a
shutdown tone.
Caution: If no Bluetooth device is connected, the speaker will be turned o within about 5 minutes.
Bluetooth Pairing
•When you unbox the speaker and power it on for the rst time, it will enter to pairing mode automatically.
•If Bluetooth device is connected, press and hold the MFB for about 2 seconds, disconnect and ready to pair
another device.
•If speaker does not connect any Bluetooth device, it will enter to pairing mode automatically.
During pairing, activate Bluetooth on your phone and set it to search for new Monster device for pairing.
When the speaker is connected successfully, connected tone will be heard and
Publicité
