Publicité
indicator lights above the SPEED button will
turn on. Press [SPEED] button again will turn to
low speed.
Timer setting
– The air purifier can be programmed to turn off
after a preset amount of time. Press
the [TIMER] button to program the timer
between 2H-4H-8H. The timer indicator light
will turn green when timer function is on.
Night light/Sleep mode
– Press [Night light/Sleep] key one time will turn
on night light mode. Press the button again, it
will turn to sleep mode. In sleep mode, all the
lights will be turn off except for the Sleep indica-
tor light, and it will turn to low speed.
– Press any key to exit sleep mode. After exiting
sleep mode, it will stay at low speed.
Filter replacement indicator
– The filter need to be replaced after use of 1000
hours. When the filter replacement indicator
turn to red color, press [Timer+Night light/
Sleep] for 3 seconds to turn off the indicator,
the air purifier will be reset for the new filter.
Note: When the appliance is not in use,
switch it off and unplug it.
Cleaning and maintenance
DANGER! Risk of injury! Always pull the
mains plug out before commencing any
work on the device.
Replacing the filter
Note: We recommend cleaning the filter
with a vacuum cleaner once a month and
replacing it every six months or every 1000
hours of use. After 1000 hours of use, the fil-
ter change indicator light will turn to red color
as a reminder to replace the filter. After you
have fitted a new filter, press timing + night
light/sleep buttons together for 3 seconds.
After 3 seconds three beeps will sound, indi-
cating the filter has been successfully
replaced.
► Cleaning – p. 4
– Holding the main body by one hand, rotate the
bottom cover anti-clockwise from the closed posi-
tion to the open position and gently remove it.
– Take out the used filter and insert the new filter
– Carefully replace the bottom cover and holding
the main body by one hand, rotate the bottom
cover clockwise from the open position to the
closed position.
Cleaning outer surface of machine
Cleaning External Surfaces
– Turn off and unplug unit.
– Use a washcloth slightly dampened with a little
water and dish washing soap to wipe the outer
case surfaces.
DANGER! Risk of injury! Do not allow
water to slip into the internal parts as this
could damage your unit and result in electri-
cal shock and injury to you.
– Put the product in a ventilated place to dry (not
exposed). Allow the unit to thoroughly dry before
use.
Troubleshooting
If something doesn't work...
DANGER! Risk of injury! Improper repairs
can result in the product functioning
unsafely. This endangers yourself and your
environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Check
against the following table first before contacting Ser-
vice. You will save yourself a lot of trouble and possi-
bly money too.
The unit is not turning on
Air-flow at outlet is re-
duced or weak purifying
effect
Filter changing indicator
keeps flashing
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
GB
• Make sure that the
power plug is con-
nected to electricity.
• Make sure that the
switch is on.
• Make sure that the
power socket has
power.
• Make sure that power
cord is not damaged.
• Check and make sure
inlet and out let are
not blocked
• If necessary, check
and clean the filter
• Replace new filter
• Replace new filter
• Reset the filter by
pressing 3s of Timer
and Night light/Sleep
19
Publicité
