GB
Device-specific safety instructions
• The product must be installed in an upright and
stable position.
• Ensure the intake and exhaust air can circulate
freely at all times.
• Keep the intake openings free from dirt and loose
objects.
• Protect the product from splash water.
• Do not place objects in the product's openings.
• Do not cover or transport the product when it is
operating.
• Do not place containers of water, e.g. vases, on
the product.
• Do not pull on the mains connection cable to
move or shift the product.
• Protect the product from direct sunlight.
• Keep the product away from radiators and other
sources of heat.
• Do not stand or sit on the product.
• If the product has not been used for a prolonged
period and you notice a burnt smell when starting
the device or the mains connection cable and plug
become hot, switch off the device, unplug from
the mains socket and contact your dealer.
• This appliance can be used by children aged from
8 years and above and by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and if they understand
the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• Only use parts which comply with the original
specification, when repairing the appliance. The
electrical and mechanical parts of this appliance
are vital to prevent safety hazards.
• The appliance must be stored in a way as to avoid
mechanical damage.
• Symbols appearing on your device may not be
removed or covered. Signs on the device that are
no longer legible must be replaced immediately.
Read and observe the instructions for use
before using the product for the first time.
Your product at a glance
Note: The actual appearance of your prod-
uct may differ from the illustrations.
► Overview – p. 3
1. Control Pannel
2. 3 in 1 HEPA Filter
3. Bottom Cover
4. Adaptor
5. Connector of Adaptor
Supplied as standard
• Air purifier
• 3 in 1 filter
18
Setting up
NOTICE! Risk of product damage! The
product must be installed in an upright and
stable position.
– Carefully remove your device from box and plastic
bag.
– Place the device on a stable and flat surface.
– For proper air flow, place the device away form
the walls or furniture at least 30 cm.
– Make sure the air outlet is not blocked.
– Before using, remove the filter and then remove
and discard bags.
– Plug the power cord into a correct voltage of
socket outlet.
Operation
Check before switching on!
DANGER! Risk of injury! The product may
only be put into operation if no faults are
found during the check-up. It is crucial that
any defective parts are replaced before the
product is used again.
Check the safe condition of the product:
– Check whether there are any visible defects.
Operating Instructions
► Operation – p. 4
6. [ ]: On/Off button
7. [ ]: Speed button
8. [ ]: Timer button
9. [ ]: Night light/Sleep button
10. [ ]: Filter resetting button
Usage methods
CAUTION! Risk of injury! Use care when
operating the air purifier by keeping all for-
eign objects, fingers, body parts, hair, loose
clothing and jewelry away from openings.
Connect the power supply
– Insert the output end of supplied adaptor into
the connector on the bottom of air purifier, make
sure the filter and the bottom cap is fully assem-
bled,then put the air purifier on flat surface like
desk, plug the adapter into the power outlet.
WARNING! Risk of injury! To make sure
safety operation of the air purifier, please
always use the supplied adaptor to avoid
any accident or injure.
ON/OFF
– Plug in the air purifier, it will enter into standby
status (no light indicator), press [ON/OFF] but-
ton to enter low speed mode(the indicator turn
to green light), press again [ON/OFF] button,
the air purifier will be powered off.
Speed
– The air purifier has two different speeds.
Press [ON/OFF] button to enter low speed
mode, the left indicator above the [SPEED] but-
ton will turn on in green light, press [SPEED]
button one time will turn to high speed, both