Publicité
Your device is fully assembled and ready to use.
1. Light rotary switch
2. Camping/night light
3. Reading light
4. HOW TO CHARGE
Before charging or recharging your appliance, carefully read the section
warning for the rechargeable battery in this manual.
Using the included USB cable (remove the protective cover first), plug it into the
USB-C input of the device and the other end of the cable into a compatible USB
power source. The charging indicators flash blue, indicating that the battery is
charging as well as the charge level (25-50-75-100%). Let it charge (for a full
charge) for about 8 hours. Once the battery is charged, the 4 indicators stop
flashing (100%). Then disconnect the cable and replace the protective cover.
Your device is ready to use. When the 25% indicator starts flashing, this means
that the battery has a charge level of less than 3%, so recharge the device before
4. Fan rotary switch
5. USB-C input / USB-A output
6. Hook
15
Publicité
