Publicité
GB
Fault/malfunction
Paint runs after spraying. Paint quantity too high?
Atomisation too coarse.
Overspray too strong.
Spray jet pulsing.
Paint drips from nozzle
head.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposing of the material
Thinners and residual paint must be discarded in an
environmentally manner. Observe the disposal
instructions of the manufacturer and the locally appli-
cable regulations on hazardous waste disposal.
Harmful chemicals must not be allowed to penetrate
the earth, ground water or water bodies.
– Never dispose of harmful chemicals in the sewer
system!
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
32
Cause
Paint too viscous?
Distance to spray surface too small?
Paint too thin?
Paint quantity too high?
Nozzle head clogged?
Paint too viscous?
Air filter clogged?
Paint quantity too high?
Distance to spray surface too great?
Paint too thin?
To little paint in suction cup?
Air filter clogged?
Paint too viscous?
Nozzle head clogged?
Nozzle insert worn?
Nozzle insert loose?
Remedy
Add a suitable thinner (► Diluting the
paint – p. 29).
Reduce paint quantity (► Setting the
paint quantity – p. 30).
Increase spray distance.
Add paint (► Diluting the paint – p. 29).
Reduce paint quantity (► Setting the
paint quantity – p. 30).
► Cleaning the spray gun. – p. 31
Add a suitable thinner (► Diluting the
paint – p. 29).
► Cleaning the air filter – p. 31
Reduce paint quantity (► Setting the
paint quantity – p. 30).
Reduce spray distance.
Add paint (► Diluting the paint – p. 29).
► Filling the suction cup – p. 30
► Cleaning the air filter – p. 31
Add a suitable thinner (► Diluting the
paint – p. 29).
► Cleaning the spray gun. – p. 31
Replace nozzle insert.
Tighten the cap nut (2).
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
Technical data
Material number
Rated voltage
Rated output
Protection class
Sound power level (L
WA
Sound pressure level (L
Vibration**
Max. viscosity
Suction cup
Weight
*)
The noise emission values indicated have been measured according to a
standardized test method and can be used to compare one power tool with
another. The noise emission values indicated can also be used for a prelim-
220001
220–240 V~, 50 Hz
900 W
II
)*
96 dB(A)
(K = 3 dB(A))
)* 83 dB(A)
PA
(K = 3 dB(A))
≤ 0,1 m/s²
(K = 1,5 m/s²)
90 DIN-s
700 ml
3,5 kg
Publicité
