Publicité
GB
Wear protective gloves
Wear tightly fitting clothing.
Your product at a glance
Note: The actual appearance of your
device may differ from the illustra-
tions.
► P. 3, fig. 1
1. Jet nozzle
2. Counternut
3. Air intake duct
4. On-Off switch
5. Hose connection
Delivery scope
• Instructions for use
• Sandblasting gun with cup
• Suction pipe
• Grit container
Operation
Set jet width
– Turn jet nozzle (1) in desired position and
fix with counter nut (2).
Supply grit
– Fill grit container (6) and screw onto sand-
blasting gun (► P. 3, fig. 2).
Check before switching on!
Check the safe condition of the device:
• Check whether there are any visible
defects.
• Check all parts to make sure that they fit
tightly.
• Check whether pressure has built up in
the compressed air system.
• Check whether the compress air connec-
tion and the pressure pipes are tight.
Compressed air supply
NOTICE! Risk of product damage!
Operate the device only with cleaned
and condensate-free compressed air.
Note: Always use screw thread seal-
ing tape (e.g. Teflon tape) when
screwing the plug-in coupling into the
device.
22
• Fittings and hoses must be designed in
accordance with the pressure and the
required air quantity.
• Always use a compressed air mainte-
nance unit with filter pressure reducer.
– Plug the compressed air hose into the
plug-in coupling and allow to engage
firmly (► P. 4, fig. 3).
Switching On-Off
– Switching on: Press the On-Off switch (4).
– Switching off: Release the On-Off
switch (4).
Cleaning and maintenance
Cleaning and maintenance at a glance
Regularly, depending on the conditions of
use
What?
Clean the device.
Every 50 operating hours or every 3
months
(more often when operating in dusty envi-
ronments)
What?
Lubricate the de-
vice.
Maintenance
Lubricate the device
DANGER! Risk of injury! Before all
work on the device, disconnect the
compressed air supply.
– Put some drops of oil in valve pin and trig-
ger.
Storage, transport
Storage
• Store the device and any accessories in a
dry, well-ventilated place.
• In case of longer periods without opera-
tion, protect the device and its accesso-
ries against soiling and corrosion.
Transport
• Use the original packaging to ship when-
ever possible.
How?
Wipe the device with
a dry cloth.
Screw off jet noz-
zle (1) and remove
residues from grit.
How?
► Lubricate the de-
vice – p. 22
Publicité
