Publicité
ATTENTION : The seat height can be adjusted independently from the height of the front wheel tubes and the
rear feet tubes.
It is essential that both front wheels are adjusted on the same height to avoid imbalance. The same applies
to the rear feet.
Note: both front wheels can be set to face inwards or outwards (e.g. for narrow passages). Simply press the
clip to mount your wheel in the desired position.
5.
Install the handles to the desired height and lock with the adjuster as shown below.
ATTENTION : To adjust the handle heights, unscrew the adjuster, adjust the height, then screw the adjuster.
Always adjust the two handles to the same height to avoid any imbalance.
We recommend to place the handles at the user's wrist height
6.
Install the backrest onto the chassis by pressing the button as shown below
DMI-F-12_Annexe 2_Notice.2
Version Octobre 2023
Page 9 sur 17
Publicité
