Publicité
9. Temperature compensation adjustment
When the thermometer is turn on, press both the Memory/Mute-unmute button and Measure
button for 2-3 seconds to go to the temperature compensation mode. By pressing the
Memory/Mute-unmute button to adjust the temperature from ±0.0 to ±2.0.
Note: All the future temperature you are taking will be automatically added the value you are
adjusted.
10. To turn off
The unit will shut down automatically after 10 seconds of no use. Or you can keep pressing the
Measure button for 5-7 seconds.
1. All memory records will loss when uninstall or reinstall the battery.
2. All settings will come to default when uninstall the battery. If need adjust the settings, please power on and
make the new settings.
11. Replace the battery.
Slide the battery cover off along the marked direction. Put two AAA batteries correctly into the compartment.
Remove the batteries if the thermometer will not be used for more than two months.
TEMPERATURE AND TAKING TIPS
1. It is important to know each individual's normal temperature when they are well. This is the only way to accurately diagnose a
fever. Record readings twice a day (early morning and late afternoon). Take the average of the two temperatures to calculate
normal oral equivalent temperature. Always take the temperature in the same location, since the temperature readings may vary
from different locations on the forehead.
2. A child's normal temperature can be as high as 99.9°F (37.7) or as low as 97.0°F (36.11). Please note that this unit reads 0.5ºC
(0.9°F) lower than a rectal digital thermometer.
3. External factors may influence ear temperatures, including when an individual has:
been lying on one ear or the other
–
had their ears covered
–
been exposed to very hot or very cold temperatures, or
–
been recently swimming or bathing
–
In these cases, remove the individual from the situation and wait 20 minutes prior to taking a temperature.
Use the untreated ear if prescription ear drops or other ear medications have been placed in the ear canal.
4. Holding the thermometer for too long in the hand before taking a measurement can cause the device to warm up.
This means the measurement could be incorrect.
5. Patients and the thermometer should stay in steady-state room condition for at least 30 minutes.
6. Before placing the thermometer sensor onto the forehead, remove dirt, hair, or sweat from the forehead area. Wait 10
minutes after cleaning before taking measurement.
7. Use an alcohol swab to carefully clean the sensor and wait for 5 minutes before taking a measurement on another patient.
Wiping the forehead with a warm or cool cloth may impact your reading. It is advised to wait 10 minutes before taking a
reading.
8. In the following situations it is recommended that 3-5 temperatures in the same location be taken and the highest one
taken as the reading:
Newborn infants in the first 100 days.
•
Children under three years of age with a compromised immune system and for whom the presence or absence of fever
•
is critical.
NOT-AD - 70 Novembre 2020 (Version 1.0)
15
Publicité
