Publicité
USING THE MIXING BOWL
1. In order to lift the arm, rotate the Locking lever (2) clockwise. The
arm will now move upwards. (FIG1)
2. Place the mixing bowl into its holding device (Step) and turn the
bowl clockwise until it locks into place (Step). (FIG2)
3. Attach the required accessories (Dough hook or Beater or Whisk)
by inserting the top into the output shaft, and turn anti-clockwise
until it locks into place. (FIG3 & FIG4)
4. Now fill the bowl with your ingredients.
Do not overfill the machine - the maximum quantity of ingredients
is 900g.
5. Insert the main plug into a properly installed 120V 60 Hz safety
power socket.
6. Switch the machine using the speed button to a speed between
1 and 8 (corresponding to the mixture).
7. For pulse operation (kneading at short intervals), turn the switch
to the "PULSE" position. The switch has to be held in this position
according to the desired interval length. When the switch is released
it returns automatically to the "0" position.
8. After kneading/stirring turn the speed knob "4" back to the "0"
position as soon as the mixture has formed a ball. Then remove the
mains plug.
9. Push the Locking lever (2) downwards and the arm will be raised.
10. The mixture can now be released with the help of a spatula and
removed from the mixing bowl.
11. The mixing bowl can now be removed.
12. Clean the parts as described under "Cleaning".
Publicité
