Publicité
backpack before carrying out any adjustment,
servicing or maintenance.
There are no user serviceable parts in your backpack.
Use soft brush to clean the debris on the surface of
backpack. Never use water or chemical cleaners to
clean your backpack. Wipe off any moisture with a
soft dry cloth as moisture can cause a shock hazard.
Always store your backpack in an enclosed space that is
inaccessible to children. Keep all working controls free of
dust. Keep away from corrosive agents.
TROUBLE SHOOTING
The following table gives problems and actions that you
can perform if your machine does not operate correctly.
WARNING: Switch the machine off and remove
the battery prior to any troubleshooting.
Problem
Possible cause
The tool fails
1. Battery not
to operate
(properly) inserted
2. No electrical
contact between
the battery pack
and backpack
harness
3. The battery
pack is depleted
4. No electrical
contact between
the adaptor and
plug
5. No electrical
contact between
the adaptor and
tool
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
Solution
1. Properly insert
battery into back-
pack harness
2. Remove the
battery pack and
check the contact.
Then reinstall the
battery pack.
3. Charge the bat-
tery pack.
9
4. Disconnect
the plug from
EN
the adaptor, then
reconnect them.
5. Disconnect the
adaptor from the
tool, then recon-
nect them.
Publicité
