Publicité
TECHNICAL DATA
Battery rated voltage
Battery type
Battery capacity
Weight (without battery)
ACCESSORIES
Battery Adapter (KA4100)
8
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
EN
the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and
offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
WARNING: This backpack harness can only be
used with Kress cordless hand tools.
BEFORE OPERATION
NOTE: Check the backpack carefully to make sure
KA0400
60V
Lithium
2.0Ah, 2.5Ah, 4.0Ah
1.95 kg
1
that no parts are damaged or missing. If any damage
occurred, please contact Service Agent.
OPERATION
Install the battery pack (See Fig. A1, A2)
Align the battery pack to the battery mounting base,
then slide it into the base.
Fix the cable (See Fig. B1, B2)
Before operating, fix the cable with hook and loop
fastener on the shoulder strap or beside the backpack.
Wear the backpack (See Fig. B3, B4, B5)
Put your arms through the backpack, then adjust
shoulder straps to make your comfortable. Adjust the
length of chest strap, then snap the chest buckle. After
that, insert the end of the chest strap into the loop.
WARNING: Do not wear other shoulder straps when
using this backpack harness.
Connect the backpack with your machine (See
Fig. C)
Insert the plug into the battery adaptor if required, then
insert the adaptor into the Kress cordless hand tool.
Follow the instructions in the tool's manual to start the
tool.
WARNING: Before connection, make sure your machine
is turned off.
NOTE: Remove the adaptor from the tool and
disconnect the plug from the adaptor after usage.
MAINTENANCE AND CLEANING
Remove the battery and adaptor from the
Publicité
