Publicité
Reset Gateway
Reset will restore the GATEWAY to its initial state. Once executed, it cannot
be reverted. Please follow the steps below to start resetting:
• Prepare a needle or pin for resetting.
• Insert the needle or pin into the Reset hole; press and hold on for more than 5 seconds.
release when the indicator of POWER light starts ashing slowly.
• Five indicators will start ashing alternately, indicating that the reset process
has begun.
The execution will take a while. Please be patient!
Questions about your new R400 Gateway?
support@waferlock.com
Your Warranty
Your Warranty covers all manufacturers' defects in workmanship and material. It does not cover any
unit that is damaged beyond normal usage, by improper installations, by contacts to chemicals, or any
other acts or omissions unsanctioned within the user manual. All components are covered for one (1)
year after the date of purchase or installation from supplier. The user is required to provide dated proof
of purchase. Waferlock or its authorized distributor will determine if there is a warrantable condition
associated with material and/or manufacturing workmanship. If the gateway conforms to the warranty
conditions, the gateway will be repaired free of charge. The shipping freights would be at owner's
expense. The warranty does not include any further obligations, such as the installation of the gateway.
All other warranties, express or implied, are disclaimed. All collateral agreements, which purport to
modify this limited warranty, are of no effect.
9
Let us help you!
WAFERLOCK CORPORATION
Publicité
