TECHNICAL DATA
Track System: 4 Track, 2 channel stereo system
Tape: Philips type cassette tape
Tape Speed: 1-7/8 ips
Wow & Flutter: Less than 0.06% WRMS, 0.17% (DIN 45500)
Frequency Response: 35 to 15,000 Hz +3 dB at LN position
35 to 15,000 Hz +3 dB at LH position
35 to 16,000 Hz +3 dB at CrO, position
35 to 18,000 Hz +3 dB at FeCr position
Distortion: Less than 1.0% at LN position
Less than 1.0% at LH position
Less than 1.5% at CrO, position
Less than 1.5% at FeCr position
Signal to Noise Ratio: Better than 56 dB at Cro, position (DIN
45500)
Dolby NR switch ON: Improves up to 10 dB above 5 kHz
Ersae Ratio: Better than 70 dB
Bias Frequency: 100 kHz
Heads: GX recording head, GX playback head and erase head
(3 head system)
Motors: 3 motor system (one DC FG servo motor for capstan
drive and two DC motors for reel drive)
F.F. & Rewind Time: 60 sec. using a C-60 Tape
Output Jacks: Line (2): 410 mV © VU)
Required load impedance: more than 47 k ohms
Phone (1): 100 mV/8 ohms
Input Jacks: Microphone (2): 0.25 mV (input impedance 2.4 k
ohms)
Required microphone impedance: 600 ohms
Line (2): 70 mV (input impedance 100 k ohms)
Semiconductors:
Transistors: 75, Diodes: 124, FETs: 4, ICs: 18
Power requirements: 120 V/60 Hz for U.S.A. & Canada
240 V/S0 Hz for Australia
110-—120 V/220—240 V, 50/60 Hz for other countries
Dimensions: 440 (W)X318 (H)X157 (D) mm
(17.3X12.5X6.2) inches
Weight: 9.5 kg (21.0 ibs)
Note: Standard reference tapes
LN position: AKAI C-60LN, FUJI FL C-60
LH position: MAXELL UD C-60
CrO, position: TDK SA C-60
FeCr position: SONY Duad C-60
without notice.
*
"Dolby" and the Double D symbol are trademarks of Dolby Laboratories, Inc.
(Under license from Dolby Laboratories.)
STANDARD ACCESSORIES
Ohta-ku, Tokyo, Japan
MANUFACTURED & DISTRIBUTED BY
AKAI ELECTRIC CO,, LTD.
AKAI TRADING CO, LTD.
12-14, 2-chome, Higashi-Kojiya,
Sno oe rt AEE
SEEN MEE ID OPES N NEI,
eR
ED AEE Ip
SPECIFICATION
Bande: Cassette de type Philips
Vitesse de bande: 4,75 cm/s
Inférieure a 1,5% a la position FeCr
Prise de sortie: Ligne (2): 410 mV (0 VU)
Poids: 9,5 kg
Note: Référence de bandes standards
LN position: AKAI C-60LN, FUJI FL C-60
LH position: MAXELL UD C-60
CrO, position: TDK SA C-60
FeCr position: SONY Duad C-60
*
Sous réserve de modification sans préavis.
*
"Dolby" et le symbole du double D sont des marques déposées
de Dolby
Laboratories, Inc. (Sous license de Dolby Laboratories, Inc.)
AKAI AMERICA, LID.
TELEPHONE: (213) 537-3880
TELEX: 67-7494
TECHNISCHE DATEN
Spursystem: Vierspur-Zweikanal-Stereo
Band: Philips-Cassetten-Typ-Band
Bandgeschwindigkelt: 4,75 cm/sek
Gleichlaufschwankungen:
Kleiner
als 0,06%
WRMS,
0,17%
(DIN 45500)
Frequenzbereich: 35— 15.000 Hz +3 dB auf LN Stellung
35— 15.000 Hz +3 dB auf LH Stellung
35— 16.000 Hz +3 dB auf CrO, Stellung
35—18.000 Hz +3 dB auf FeCr Stellung
Klirrfaktor: Kleiner als 1,0% auf LN Stellung
Kleiner als 1,0% auf LH Steliung
Kleiner als 1,5% auf CrO, Stellung
Kleiner als 1,5% auf FeCr Stellung
Signal-Gerdusch-Verhiltnis: Besser als 56 dB auf CrO, Stellung
(DIN 45500)
Dolby
Schalter
ON
(EIN): Verbesserung
bis zu 10 dB
oberhalb 5 kHz
Léschdiimpfung: Besser als 70 dB
Vormagnetisierfrequenz:
100 kHz
.
Tonképfe: GX-Aufnahmekopf, GX-Wiedergabekopf und Lésch-
kopf (3 Kopf-System)
Motoren: 3
Motor-System
(1
DC
FG = Servomotor
fiir
Kabestanantrieb und 2 DC Motoren fiir Bandspulenantrieb)
Dauer des Schnellvorlaufs und Schnelliriicklaufs: 60 Sekunden
bei C-60 Band
Ausgiinge: Direktausgiinge (2): 410 mV (0 VU)
Erforderliche Anschlussimpedanz: grésser als 47 k Ohms
Kopfhérerausgang (1): 100 mV/8 Ohms
Eingiinge: Mikrofoneingange (2): 0,25 mV (Eingangsimpedanz:
2,4 k Ohms)
Erforderliche Mikrofonimpedanz: 600 ohms
Direkteinginge (2): 70 mV (Eingangsimpedanz: 100 k Ohms)
Halbleiter: 75 Transistoren, 124 Dioden, 4 FETs, 18 integrierte
Schaltkreise
Netzspannungen: 120 V/60 Hz fiir Amerika und Kanada
240 V/50 Hz fiir Australien
110—120 V/220—240 V, 50/60 Hz fiir andere Lander
Abmessungen: 440 (B)X318 (H)157 (T) mm
Gewicht: 9,5 kg
Anmerkung:
Standardreferenzbinder
LN Stellung: AKAI C-60LN, FUSI FL C-60
LH Stellung: MAXELL UD C-60
CrO, Stellung: TDK SA C-60
FeCr Stellung: SONY Duad C-60
*
Der Verbesserung dienende Anderungen in Konstruktion und technischen
Daten
ohne Vorankiindigung vorbehalten.
*
"Dolby" und das Doppel-D-Symbol sind Warenzeichen der Dolby
Laboratories
ees
- 22
a ee
e
cone
een
eeean
©) 521114B1