Attention : sachez que l'attribution de la valeur « O » au
paramètre « Maximum Idle Time » (Durée maximale d'inactivité)
et/ou l'activation de l'option de reconnexion automatique peut
augmenter le montant de votre facture téléphonique.
4. Si vous vous connectez à Internet à l'aide du protocole PPP sur
Ethernet, il n'est probablement pas nécessaire de saisir des
informations sur cet écran.
5. Cliquez sur « FINISH » lorsque vous avez terminé.
De nombreux fournisseurs utilisent des modems présentant des
fonctions de configuration automatique. Parfois, les informations
de connexion sont stockées au niveau du modem et doivent être
actualisées. Il se peut qu'il soit nécessaire d'arrêter et de
redémarrer votre modem après avoir configuré votre routeur
Barricade.
6. Redémarrez votre modem xDSL en le mettant hors tension, en
attendant quelques secondes, puis en le rebranchant.
Félicitations ! La configuration de base est terminée et votre routeur
Barricade est à présent connecté à Internet. Il est également
possible de modifier la configuration de certaines options avancées,
mais nous vous déconseillons de le faire, à moins que cela ne soit
nécessaire.
Pour obtenir des instructions concernant les options de configuration
avancées, reportez-vous au Manuel d'utilisation présent sur le CD-
ROM et sur le site Web www.smc-europe.com
Chapter 5. About SMC
Quickinstallation Guides
For Quick Installation Guides in German, French, Italian and
Spanish see www.smc-europe.com.
Full Installation Manual
Full installation manuals are provided on the Installation CD-Rom.
Manuals in other languages than those included on the CD-Rom are
available on www.smc-europe.com (section support).
Firmware and Drivers
For latest driver, technical information and bug-fixes please visit
www.smc-europe.com (section support).
Limited Lifetime Warranty Statement
For detailed information on SMC's limited lifetime warranty please
check the English full manual on this CD-Rom or visit
www.smc-europe.com (section support, product registration).
Contact SMC
Contact details for your relevant countries are available on
www.smc-europe.com and www.smc.com.
Statement of Conditions
In line with our continued efforts to improve internal design,
operational function, and/or reliability, SMC reserves the right to
make changes to the product(s) described in this document
without notice. SMC does not assume any liability that may occur
due to the use or application of the product(s) described herein.
In order to obtain the most accurate knowledge of installation,
bug-fixes and other product related information we advise to visit
the relevant product support page at www.smc-europe.com before
you start installing the equipment. All information is subject to
change without notice.