Publicité
EN Recovery-Stick, Getting started
For what purpose is the Recovery USB Flash-Drive used?
If the Windows user interface shows unrecoverable problems, the operating system can be
restored to its default state. Therefore, we recommend creating a backup with the Recovery
USB Flash-Drive after the initial setup. In case of serious errors in Windows it can be started
directly from the Recovery USB Flash-Drive and the operating system can be re-installed.
Creating a backup on the Recovery USB Flash-Drive
This requires an external mouse and keyboard.
Shut down the panel.
▪
Carefully remove the glass cover by drawing it towards yourself.
▪
Connect the Recovery USB Flash-Drive.
▪
Start the panel with the On/Off-Button.
▪
Paragon starts from the Recovery USB Flash-Drive. The Main View is displayed.*
▪
Connect a mouse.
▪
Select the "Backup tasks (Sicherungsaufgaben)" tab and choose the "Sicherungsquelle
(Backup source)" option
▪
In the next dialogue, "Sicherungsquelle auswählen (Select backup source)," click on "Disk/
Laufwerk (Disk/Drive)."
There, select the "Disk 0" drive and confirm by clicking OK.
▪
Now click on "Zielspeicherort (Target storage)" to select the "Speicherort (storage location)".
▪
In "Sicherungsziel auswählen (Choose a target to create your backup on)" go to "Externe
▪
Datenträger (External devices)" and select "PARAGON (D :)."
Select "OK".
▪
A summary is displayed.
▪
Select "Back up now".
The image creation process will begin.
▪
When the creation is complete, select the On/Off icon in the lower left corner of the screen
and select "Herunterfahren (Shut Down)".
▪
Remove the Recovery USB Flash-Drive.
Restart the panel.
▪
Attach the front glass.
▪
8
Publicité
