Publicité
EN Recovery-Stick, Getting started
*Should Paragon not start automatically from the Recovery USB Flash Drive:
Connect a keyboard.
▪
Press the "Delete" key in quick succession during the boot process to enter the boot menu.
▪
In the boot menu, go to the "Startup" tab.
▪
At the bottom of the blue highlighted line you can see the version of the Bios.
▪
For Bios version 2.18.1263:
▪
In the "Boot" tab, check the "Boot Mode Select". This should be set to "UEFI". If this is
not the case, select the "Boot Mode Select" with the arrow keys and press Enter. Select
"UEFI" with the arrow keys. Press Enter again.
▪
Switch to the "Save and Exit" tab.
Select "Save and reboot".
▪
For Bios version 2.17.1249:
In order to start Paragon directly the next time you use the Recovery USB Flash-Drive,
▪
check the boot order under "Boot Option Priorities": Boot Option #1 must be "UEFI: SMI
USB DISK" and Boot Option #2 must be the SSD hard disk.
−
To change the boot order, use the arrow keys to select Boot Option #1, press Enter,
and use the arrow keys to select "UEFI: SMI USB DISK".
−
Confirm with Enter.
▪
If the boot order is correct, go to the "Save and Exit" tab.
▪
Select "Save and reboot".
If Paragon does not boot despite the correct order, reboot and press the "Delete" key
▪
in quick succession during the boot process to enter the boot menu.
Use the arrow keys to switch to the "Save & Exit" tab and select "Boot Overwrite UEFI:
▪
SMI USB DISK" and press "Enter".
Select "Save and reboot".
▪
10
Publicité
