Publicité
Clean the pot and fried plate with hot water, some washing-up liquid and a non-abrasive
3.
sponge.
You can use degreasing liquid to remove any remaining dirt
Tip: lf dirt is stuck to the fried plate or the bottom of the pot, fill the pot with hot water with
some washing-up liquid. Put the fried plate in the pot and let the pot and the fried plate soak
for approximately 10 minutes.
Clean the inside of the appliance with hot water and non-abrasive sponge
4.
Clean the heating element with a cleaning brush to remove any food residues.
5.
STORAGE
Unplug the appliance and let it cool down
1.
2.
Make sure all parts are clean and dry.
ENVIRONMENT
Do not throw away the appliance with the normal household waste when it is exhausted, but hand
it in at an ofÏcial collection point for recycling. By doing this, you help to preserve the environment
GUARANTEE AND SERVICE
If you need service or information or if you have a problem, please contact your local authorized
service centre.
TROUBLESHOOTING
Problem
The Hot-air fryer does
not work.
The ingredients fried
with the air fryer are
not done.
Possible cause
The appliance is not plugged
in.
You have not save the timer.
The amount of ingredients in
the pot is too big.
The set temperature is too low.
The preparation time is too
short.
Solution
Put the mains plug in an earthed
wall socket.
Set the timer key to the required
preparation time to switch on the
appliance
Put smaller batches of ingredients in the
pot. Smaller batches are fried more
evenly.
Set the temperature key to the
required temperature setting (see
section 'settings' inchapter 'Using
the appliance').
Set the timer to the required
preparation time
'Settings' in chapter 'Using the
appliance')
(see section
Publicité
