Publicité
Electric Shock Hazards
Electrical equipment including lines and plug connections should be free from nudity.
Electrical equipment (including lines and plug connections) should be detective.
The generator set must not be connected to other power sources, such as the power com-
pany supply mains. In special cases where stand-by connection to existing electrical sys-
tems is intended, it shall only be performed by a qualified electrician who has to consider
the differences between operating equipment using the public electrical supply network
and operating the generator set. In accordance with this part of ISO 8528 the differences
shall be stated in the instruction manual.
Precaution against electrical shock depends on circuit breakers specially matched to the
generator set. If the circuit breakers require replacement they must be replaced with a
circuit breaker having identical ratings and performance characteristics.
Due to high mechanical stressed only tough rubber-sheathed flexible cable (in accordance
with IEC 60245-4) or the equivalent should be used.
The circuit breakers should be matched with the generator equipment.
If the circuit breakers require replacement, they must be replaced with a circuit breaker
having identical ratings and performance characteristics.
Don't operate the generator before grounding.
If using extension lines, the requirement should be met as following: for 1.5mm2, the line
should not be exceeded 60m; for 2.5mm2, the line not exceeded 100m.
NOTICE!
When you operate the generator set, please put on protections such as gloves to protect your
hands from high temperature.
-02-
Publicité
