Télécharger Imprimer la page

Lux Tools A-LB-20/130-24 Notice Originale page 22

Publicité

GB
Do not expose the battery pack to sunlight
or increased temperatures!
MAX xx °C
MAX xx °C
Personal safety equipment
Wear goggles when working with the de-
vice.
Wear ear defenders when working with the
device.
Wear sturdy shoes when working with the
device.
Wear protective gloves when working with
the device.
Wear tightly fitting clothing when working
with the device.
Your device at a glance
Note: The actual appearance of your prod-
uct may differ from the illustrations.
► P. 3, fig. 1
1. Blower nozzle
2. On/Off switch
3. Hand grip
► P. 3, fig. 2
4. Battery pack
5. Locking button
6. Indicator lights
7. Battery charger
8. Display for remaining capacity
9. Push button for capacity display
Scope of delivery
• Instructions for use
• Leaf blower
Assembly
► P. 4, fig. 3
DANGER! Risk of injury! Never use the
unit with only one part of the blow nozzle
attached.
– Put all parts of the blow nozzle (1) together as
shown and snap them securely into place.
– Push the blow nozzle (1) onto the blow opening of
the motor housing until the release button (10)
engages.
– To remove the blowing nozzle, press the release
button (10) and pull off the nozzle.
Using for the first time
Charging the battery pack
Note: Rechargeable battery and charger
are not part of the scope of delivery and are
available optionally from your dealer
(► Accessories – p. 24).
WARNING! Risk of injury! Comply with all
safety instructions when handling recharge-
able devices.
22
NOTICE! Risk of damage to the unit! Do
not allow the battery pack to deep discharge.
Note: The Li-Ion battery pack can be
charged at any time without affecting the life-
time of the unit. Interrupting the charging
process will not damage the battery pack.
• The battery pack must be charged prior to the first
start-up (charging time: ► Technical data – 
p. 23).
– Press in the locking button (5) and remove the
battery from the device.
– Insert the battery pack into the charger.
– Plug the charger into the power supply.
The charging status is displayed by the indicator
lights (6).
– Slot the battery pack into the device and make
sure it clicks into place correctly.
Checking the remaining capacity of the battery
– Press the button (9).
The remaining capacity of the battery is displayed by
the indicator lights (8).
Operation
Check before starting!
DANGER! Risk of injury! The device must
only be put into operation if no faults are
found. If any part of the device is defective,
it must be replaced before the next use.
Check the safety equipment and the safe condition of
the device.
– Check all parts to make sure they fit tightly.
– Check whether there are visible defects: broken
parts, cracks, etc.
Switching on and off
– Switching on: Press the On/Off switch (2).
– Switching off: Release the On/Off switch (2).
Note: Work with leaf blowers/vacuums may
not be performed during normal quiet hours.
Cleaning and maintenance
DANGER! Risk of injury! Switch off the
product and disconnect the mains plug
before all cleaning and maintenance work.
Wait till all moving parts are completely
stopped.
Cleaning the device
• Brush off coarse dirt.
• Wipe down the device with a slightly damp cloth.
Storage, transport
Storage
DANGER! Risk of injury! Make sure that
unauthorized persons do not have access to
the device!

Publicité

loading

Ce manuel est également adapté pour:

196266