Publicité
– Slot the battery pack into the device and make
sure it clicks into place correctly.
Checking the remaining capacity of the battery
– Press the button (11).
The remaining capacity of the battery is displayed by
the control lights (10).
Operation
Check before starting!
DANGER! Risk of injury! The device must
only be put into operation if no faults are
found. If any part of the device is defective,
it must be replaced before the next use.
Check the safety equipment and the safe condition of
the device.
– Check all parts to make sure they fit tightly.
– Check whether there are visible defects: broken
parts, cracks, etc.
Setting the blower or vacuum speed
Note: A lower power level is sufficient for
many jobs. We recommend starting the
work in a low setting and increasing the
power accordingly if necessary. A lower set-
ting can significantly reduce the volume.
– Set the speed regulator (2) to the required blow-
ing or vacuuming speed.
Switching on and off
– To switch the machine on, press the On/Off but-
ton (3).
– To switch the unit off, release the On/Off
switch (3).
Note: Work with leaf blowers/vacuums may
not be performed during normal quiet hours.
Fault/malfunction
Device does not work.
Vacuum result is not suffi-
cient.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Cause
Is the device defective?
Battery pack discharged?
Battery pack defective?
Collecting sack full?
Suction speed too low?
Product clogged?
Cleaning and maintenance
DANGER! Risk of injury! Switch off the
product and disconnect the mains plug
before all cleaning and maintenance work.
Wait till all moving parts are completely
stopped.
Cleaning the device
• Brush off coarse dirt.
• Wipe down the device with a slightly damp cloth.
• Clean the catch-sack regularly
Removing the collecting sack
► P. 4, fig. 5
– Push the unlocking button (15) and remove the
collecting sack.
Storage, transport
Storage
DANGER! Risk of injury! Make sure that
unauthorized persons do not have access to
the device!
• Store the device in a dry place.
• Before each storage, the catch-sack must be
cleaned.
Transport
• Secure the device against slipping.
• If possible, use the original packaging for dis-
patching.
Faults and remedial measures
When something isn't working...
DANGER! Risk of injury! Improperly per-
formed repairs can lead to the device not
functioning safely. This endangers yourself
and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedial measure
Contact your local vendor.
► Charging the battery pack –
p. 24.
Contact your local vendor.
Empty collecting sack (► Removing
the collecting sack – p. 25).
► Setting the blower or vacuum
speed – p. 25
Rectify clogging
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
GB
25
Publicité
