Publicité
GB
Do not expose the battery pack to sunlight
or increased temperatures!
MAX xx °C
MAX xx °C
Personal safety equipment
Wear goggles when working with the de-
vice.
Wear ear defenders when working with the
device.
Wear sturdy shoes when working with the
device.
Wear protective gloves when working with
the device.
Wear tightly fitting clothing when working
with the device.
Your device at a glance
Note: The actual appearance of your prod-
uct may differ from the illustrations.
► P. 3, fig. 1
1. Blower nozzle
2. Speed regulator
3. On/Off switch
4. Main hand grip
5. Protective cover for suction opening
► P. 3, fig. 2
6. Additional hand grip
7. Suction tube
8. Catch-sack
► P. 3, fig. 3
9. Battery pack (not included in the scope of deliv-
ery)
10. Display for remaining capacity
11. Push button for capacity display
12. Locking button
13. Control lights
14. Battery charger (not included in the scope of
delivery)
Scope of delivery
• Instructions for use
• Cordless vacuum cleaner/blower
• Catch-sack
Assembly
Assembling as leaf blower
► P. 4, fig. 4
DANGER! Risk of injury! Never use the
unit with only one part of the blow nozzle
attached.
– Plug both parts of the blow nozzle (1) together as
shown and allow them to engage securely.
– Push the blow nozzle (1) onto the blow opening of
the motor housing until the release button (15)
engages.
24
– Close the protective cover of the intake open-
ing (5).
Note: The unit cannot be switched on if the
protective cover is not completely closed.
– To remove the blowing nozzle, press the release
button (15) and pull off the nozzle.
Assembling as a leaf vacuum cleaner
► P. 4, fig. 5
WARNING! Risk of injury! Never use the
unit with only one part of the suction pipe
attached.
NOTICE! Risk of damage to the device!
After the two-piece suction pipe has been
plugged together, it must not be disassem-
bled into two parts again.
– Plug both parts of the suction pipe (7) together as
shown and let them engage securely.
– Push the collecting bag (8) onto the blow opening
of the motor housing until the release button (15)
engages.
– Open the protective cover of the intake open-
ing (5).
– Insert suction pipe (7) into aspiration port as illus-
trated, until the release button (16) engages.
Note: If the suction pipe is not fully engaged
the device will not switch on.
– Hook the collection bag into the eyelet (17) as
shown.
– To remove the collecting bag, press the release
button (15) and pull off the collecting bag.
– To remove the suction pipe, press the release but-
ton (16) and pull out the suction pipe.
Using for the first time
Charging the battery pack
Note: Rechargeable battery and charger
are not part of the scope of delivery and are
available optionally from your dealer
(► Accessories – p. 26).
WARNING! Risk of injury! Comply with all
safety instructions when handling recharge-
able devices.
NOTICE! Risk of damage to the unit! Do
not allow the battery pack to deep dis-
charge.
Note: The Li-Ion battery pack can be
charged at any time without affecting the
lifetime of the unit. Interrupting the charging
process will not damage the battery pack.
• The battery pack must be charged prior to the first
start-up (charging time: ► Technical data –
p. 26).
– Press in the locking button (12) and remove the
battery from the device.
– Insert the battery pack into the charger.
– Plug the charger into the power supply.
The charging status is displayed by the control
lights (13).
Publicité
