• The permitted revolutions of the tool must be
at least as high as the highest revolutions
specified on the power tool. Accessories that
rotate faster than they are permitted to may break
and fly and thus cause injuries.
• Remember that moving parts may also be located
behind ventilation and venting slots.
• Symbols affixed to your unit may not be removed
or covered. Information on the unit that is no
longer legible must be replaced immediately.
Before putting the unit into operation, read
and observe the instructions for use.
Only re-charge the battery pack indoors.
Do not dispose of a battery pack with the
household waste!
Do not dispose of a battery pack in water!
Do not burn the battery pack!
Do not expose the battery pack to sunlight
or increased temperatures!
MAX xx °C
MAX xx °C
Risks caused by vibrations
CAUTION! Risk of injury due to vibra-
tions! Vibrations may, in particular for per-
sons with circulation problems, cause dam-
age to blood vessels and/or nerves.
If you notice any of the following symptoms,
stop working immediately and consult a doc-
tor. Numbness of body parts, loss of sense
of feeling, itching, pins and needles, pain,
changes in skin colour.
The vibration values specified in the technical data
represent the main uses of the device. The actual
existing vibrations during use may deviate from these
as a result of the following factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by following
the tips below:
– Maintain the device in accordance with the
instructions in the operating instructions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and your
hands, in particular, are kept warm.
– Take regular breaks and move your hands at the
same time to promote circulation.
Personal protective clothing
Wear goggles when working with the de-
vice.
Wear ear defenders when working with the
device.
When working with tools that cause consid-
erable dust, wear a dust protection mask.
Do not wear protective gloves when work-
ing with the device.
Wear tight fitting clothes when working with
the device.
If you have long hair, cover or wear a hair
net.
Your unit at a glance
Note: The actual appearance of your prod-
uct may differ from the illustrations.
Battery-powered screwdriver
► P. 3, fig. 1
1. chuck
2. Torque regulator
3. Revolution switch
4. Rotation direction switch
5. On/Off switch
6. Battery pack
Battery charger
► P. 4, fig. 2
6. Battery pack
7. Battery charger
8. Control light (red)
9. Control light (green)
Scope of delivery
• Operating manual
• Battery-powered screwdriver
• Battery charger
• Battery pack
• Screwdriver bit
Operation
Charging the battery pack
NOTICE! Risk of damage to the unit! Do
not allow the battery pack to deep dis-
charge.
NOTICE! Risk of damage to the unit! Do
not press the On/Off switch after the device
has deactivated automatically.
NOTICE! Risk of damage to the unit!
Remove the battery pack from the charger
after you have finished charging it.
Note: The Li-Ion battery pack can be
charged at any time without affecting the
lifetime of the unit. Interrupting the charging
process will not damage the battery pack.
• The battery pack must be charged prior to the first
start-up (charging time: ► Technical data –
p. 31).
GB
29