Publicité
EN
The application will allow you to :
- Connect to over 15,000 digital radios
- Play music from a streamer (DEEZER, SPOTIFY, TIDAL...)
- Select a source on your product
- Manage multiroom mode
- Knowing what music you're playing
- Manage the sound volume
- Simultaneously add and control other Elipson products
SOURCE MANAGEMENT
By default, the Connect 2130 Xi is in AUX/LINE IN mode via the S300 Xi streamer. To
switch to Wifi mode, simply stream music using the WiiM HOME app or via AIRPLAY 2 or
CHROMECAST.
WIFI or LINE IN sources are selected from the Elipson multiroom application. Switching
to TV ARC source is performed automatically by detection a signal.
THE VOLUME IS ADJUSTED ACCORDING TO THE SOURCE
- HDMI ARC : volume is controlled by the television
- Line input : volume is controlled by the WiiM HOME application via the STREAM S300 Xi
- Bluetooth : volume is managed by the connected device
V. RACK OPTION
RACKING YOUR AMPLIFIER
To install your Connect 2130 Xi amplifier in a rack, please obtain the optional 1U rack
front panel* from your dealer.
Step 1 : To install, first remove the two TORX screws on the front of each unit.
Step 2 : Then place the "1U rack front panel" against the amplifiers. Tighten the TORX
screws again to secure the unit to the rack.
IMPORTANT : this part must be installed to maintain the rigidity of the assembly.
Step 3 : Remove the two screws to install the "rack lock" (included with the Connect
2130 Xi device), then retighten the two TORX screws.
*EAN : 3700795194348 - SKU : ELICON2130XIRAC
TV
TV-A -AR R C C
30
See the diagrams below :
1
2
3
TV-ARC
TV-ARC
TV
TV-A -AR R C C
31
EN
Publicité
