Publicité
EN
STREAM S300 Xi
3.1 - Device status LED (White : product on / Red : product in low-power standby
mode)
3.2 - Bluetooth pairing button
3.3 - Reset button
3.4 - Ethernet port (RJ45)
3.5 - LED corresponding to network mode activation (flashing light, device ready for
network connection/light steady, device connected to network)
3.6 - LED for Bluetooth mode activation (blinking light, device waiting for connection/
light steady, device connected)
3.7 - Led corresponding to analog input activation
3.1
3.2
3.3
TV-ARC
3.4
3.5
3.6
3.7
24
PRECAUTIONS BEFORE CONNECTION
Always turn off the power to your amplifie before making any
connections. Before turning on your amplifier, make sure that the volume
of your amplifier is at a minimum and that there are no short-circuits in the
wiring.
When deciding on the final location, keep in mind that there should be
enough space behind the amplifier to accommodate interconnect
cables.
25
EN
Publicité
