Télécharger Imprimer la page

Grundig 871125212891 Manuel D'utilisation page 3

Publicité

CONTENTS
l
Wireless Earbuds with Mic
l
1 USB Charging Cable
l
1 User Manual
SPECIFICATIONS
l
Bluetooth Version: Bluetooth v4. 2
l
Wireless Range, about 33ft
l
Impedance: 32 ohms
l
Driver Unit: 10mm
l
Frequency response: 20Hz-20KHz
CHARGING THE BATTERY
The internal battery must be fully charged before first use of the wireless earbuds. To charge, use the USB
charge cable included.
I. Insert the smaller micro-USB end of the cable into the CHARGE INPUT on the earbud unit
2. Insert the larger USB end of the cable into the USB port of a computer OR into a compatible USB DC port
3. 7V wall charger (not included) to charge through a standard wall outlet. The indicator lights up red during
charging and will turn blue when charging is complete. Unplug from the power source when charging is
complete
WIRELESS EARBUDS OPERATION
Wireless playback Via Bluetooth®:
1. Make sure the battery is charged as explained above
2. On the controller, press and hold the POWER/PLAY BUTTON until the indicator light flashes blue and
red - this means the Bluetooth function is active and ready to connect to your smartphone / Bluetooth
audio device. NOTE: if you do not pair the earbuds to a Bluetooth device after 5 minutes of being
turned on, the earbuds will turn off automatically. Redo this step to try to connect again
3. Once you activate the Bluetooth function on your audio device, it should automatically recognise the
earbuds unit and allow you to select it. Using the name "12891" If required, enter the password to complete
the wireless connection. When the earbuds are connected, the indicator light on the controller will flash blue
and you are now set to enjoy wireless audio within a 33ft range of the audio device
4. Before playback, first adjust the volume of your audio device to a medium level as a safe starting point
5. To play the audio, click the POWER/PLAY BUTTON once
6. To pause the audio, click the POWER/PLAY BUTTON once.
7. To increase the volume, press and hold +. To decrease the volume, press and hold -. The earbuds make a
chiming sound when they reach maximum volume. You may then adjust the volume on your audio device to
make it even louder or softer, as desired
8. To go to the next song, click + once. To go to the previous song, click - once
9. To answer an incoming call, click the POWER/PLAY BUTTON once
10 To hang up a phone call, click and hold the POWER/PLAY BUTTON
11. To disconnect and turn off the earbud's unit, press and hold the POWER/PLAY BUTTON until the indicator
light goes out

Publicité

loading