Publicité
EN Installation Manual
General Information, Purpose of Use
Before first use, the user is required to properly consult this Installation Manual to ensure safe and trouble-free use of the product. This is a statio-
nary LED luminaire designed to illuminate indoor areas such as bathrooms, corridors, etc. The luminaire is designed as a mirror with the light source
located behind the mirror. The mirror is thus particularly suitable for use as decorative lighting. LED mirrors are mirrors illuminated by powerful LED
strips with low power consumption and bright luminosity. The lifetime of the LEDs is up to 50,000 hours.
Safety Instructions
Any handling, maintenance or installation must comply with the basic safety requirements imposed by the activity.
Follow any other safety instructions in this manual.
The instructions so marked are primarily to prevent general danger or personal injury.
The instructions so marked are primarily to Electric danger or personal injury from electrical hazards.
Connection to the mains must only be carried out by a person with an electrical qualification.
Bathroom mirror connection conditions:
- The mirror must be installed in accordance with the applicable safety regulations.
- The product may be connected to a fixed supply in a 1NPE 230V 50Hz TN-S network.
- Pre-wired protection max: 10A and current protector RCD 30 mA.
Handling
The luminaire is supplied packed in a carton and covered with foil protected by polystyrene lining. Due to its extra weight and large size,
please handle the luminaire very carefully. The luminaire is equipped with a mirror which is very fragile and can easily break. For square
mirrors, leave the plastic protective corner covers on during handling and remove them after installation.
Installation
The luminaire is intended primarily for mounting on a wall or other surface designed for indoor use.
The luminaire can be installed in the washbasin area and in areas with a bathtub or shower outside the 0+1+2 zone (see pictures in the Assembly
Instructions). The electrical installation must be carried out by a person with an electrical qualification. The connection is carried out by: a) moving
supply b) connecting the supply cable (at the back of the mirror) to the existing wiring in the wiring box preferably located behind the mirror. If
there is already a connection cable on the wall, it can be connected via the terminal box to the connection cable on the back of the mirror.
Maintenance
Warranty Period
The product is covered by warranty within the meaning of the Civil Code. The manufacturer provides warranty of 24 months from the product pur-
chase. Any handling and operations other than those recommended in this manual are prohibited.
2
Publicité
