Publicité
6.6 Before turning off the heater, please turn the thermostat to the MIN position and turn the switch to
the fan position, let the heater cool down for two minutes, then turn off the heater and pull out the
plug .
6.7 LED lamp: controlled by LED control; the lamp is adjustable vertically and horizontally by 90°; the
angle of illumination is 120°.
6.8 The USB socket can charge a mobile phone with an output voltage of DC5V, with a current
<
intensity of up to 2A, and with a built-in chip that allows automatic adaptation for 1A-2A, which is an
ideal solution to solve the issue of different intensities required to charge mobile phones.
7.
USING INSTRUCTIONS
7.1 Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet
environments and flammable objects.
7.2 Connect the fan heater to the mains.
7.3 Set the thermostat knob to the MAX and let the heater operate with full power.
7.4 The fan heater will switch on when the heating selector is set to one of the power settings.
7.5 Once the room reaches the required temperature, heating element will stop working but fan also
working. Once the temperature decreased, the heating element will be working. The fan heater now
starts and stops automatically and thus keeps the room temperature constant.
7.6 Before switch off the heater, please turn the thermostat to MIN position and turn the switch to fan
position, let the appliance cool down for two minutes then turn off the heater and pull out the plug.
8.
CLEANING AND MAINTENANCE
8.1 Before cleaning the appliance, disconnect it from the socket and let it cool down. The enclosure is
easily to get dirty, wipe it often with soft sponge. For every dirty parts, wipe with a sponge dipped in
<50°C water and mild detergent, then dry the heater enclosure with clean cloth. Be careful not to let
the water enter the appliance inner. Don't splash water onto the heater, never use solvent like
gasoline etc. to clean the heater, in order to protect the enclosure.
Publicité
