Publicité
19.Install the swing armrest and fix it with
Nut D.
21.Insert the disassembled metal beam into
the corresponding hole of the swing, install
the swing beam and use the swing pin to fix
it. and then reinstall the removed nut fittings
to fix the beam again.
23.Install the net onto the basketball hoop,
insert it into the castle panel, secure and
tighten with Nut C.
20.Remove a section of the nut fitting from
the one end of the metal beam.
22.Put the installed swing on the swing
position, insert them into the holes on the
top of the mental beam and fix and tighten
them with Nut A.
Publicité
