Publicité
7.Attach the assembled steps and entrance
panel with Nut D. Secure and tighten with a
nut runner.
9.Fix the platform panel to the correspond-
ing position with the Nut D. As shown in the
picture, then install the slide and stair with
Nut B and Nut C.
11.Connect one side of the two bottom
panels to the castle panel first and fix and
tighten them with Nut A.
8. Determine suitable locations for steps and
slides.
10.Cover the castle side panel on the other
side with Nut D, Nut B and Nut C, and
tighten with a nut-tightening tool.
12.Fix the Nut G in the correct position and
put the castle side panel on it to check
whether it is suitable. Pay attention to the
direction of the long side and short side of
the Nut G.
Publicité
