Publicité
ATTENTION !
The SOLE KIT solar powered system is intended for residential
applications and light commercial gate operation with limited
cycles per day.
While our system can operate over 30 cycles and/or provide over
1 week of standby time on fully charged batteries, it needs enough
standby time to fully recharge the batteries or it will eventually run
out of charge to operate the system.
We highly recommend to keep the system as simple as possible and
avoid adding accessories that draw current from the batteries. The
KEY AUTOMATION control units manages energy consumption
and powers down all components, accessories and peripherals that
are not required to operate when the gate is fully closed.
ATTENTION !
You must activate the stand-by function. Stand-by function is
activated when the gate/barrier is totally closed.
CONSUMPTION CHART
ITEM
CT10324
CT20324
MA24 with one PO24(gate
closed)*
MA24 with two PO24(gate
closed)*
FT33 / FT23
ECLIPSE
LED strip (18 leds)
* For MA24 no DYL (display) connected
2.7 - Installation example
DATA
Location
Sliding gate length
Gate weight
Moving time
Pause time
Nc (Cycles/day)
Daily NLS activated
Battery capacity
STATUS
in stand-by no accesories
in stand-by no accesories
in stand-by no accesories
in stand-by no accesories with RX4Y / RX4K
in stand-by no accesories
in stand-by no accesories with RX4Y / RX4K
One TX and one RX during activation
COURTESY light on
FLASHLIGHT on
ATTENTION !
For barriers ALT3/4/6 do not connect LED lights on boom
and disconnect double colour led discs on the barrier (only
possible to connect RED led with flashlight function). See
instruction of barrier control unit.
ATTENTION !
Never use the solar panel and the ac transformer at the same
time (fig. 6)
For a balanced system your Solar Panel should recieve at least
6 hours of direct sunlight. To calculate solar radiance in your area
consult the web.
FUNCTION
STAND BY=1
STAND BY=1
ENERGY SAVING=1
ENERGY SAVING=1
ENERGY SAVING=1
ENERGY SAVING=1
in function
in function
in function
in function
ATTENTION !
Example of installation with SUN11024 and with 12 hours
Night Light System (NLS) (Eclipse + cover LED strip) and
without Night Light System.
Daily consumption= A+B+W+NLS
KEY AUTOMATION control units allow to read actual current draw
of motors during work cycle, see relative instruction.
VALUE / DESCRIPTION
Venice, Italy
5m
1000 kg
1 minute
30 seconds
48
12 hours (LIGHT INTENSITY default= 3)
18Ah
EN
A/h
W
0,0350
0,83
0,0270
0,65
0,0195
0,47
0,0235
0,56
0,0210
0,51
0,0250
0,6
0,0290
0,69
0,0325
0,77
0,0200
0,99
0,0325
0,77
7
Publicité
