Publicité
EN
STEREO MODE
Place the selector located on the rear part of the power amplifier in the STE position.
In this mode, the two channels operate independently. Connect the two loudspeaker inputs and two outputs.
The channel volume is adjusted separately.
R
L
CH B
GND
LIFT
CH A
INPUTS
BRIDGE MODE
Place the selector located on the rear part of the power amplifier in the BRI position.
In this mode, the input of the two channels will be the channel A input signal. The two power amplifier
channels are connected internally so that their power is combined in one single output. Connect the channel
A input and the loudspeaker BRI output. The volume is adjusted with the CH A control.
CH B
GND
LIFT
CH A
INPUTS
STE
BRI
PAR
CH B
CH A
(1+, 1-)
BRIDGE
8
ONLY
-
+
+
MODE
STE
BRI
PAR
OUTPUTS
STE
BRI
PAR
CH B
CH A
(1+, 1-)
BRIDGE
8
ONLY
-
+
+
MODE
STE
BRI
PAR
OUTPUTS
(1+, 1-)
STEREO/
SA-204
PARALLEL
STEREO POWER AMPLIFIER
150 + 150 W RMS, 4
100 + 100 W RMS, 8
-
200 W RMS BRIDGE 8
(1+, 2-)
BRIDGE - 8
ONLY
L
R
(1+, 1-)
STEREO/
SA-204
PARALLEL
STEREO POWER AMPLIFIER
150 + 150 W RMS, 4
100 + 100 W RMS, 8
-
200 W RMS BRIDGE 8
(1+, 2-)
BRIDGE - 8
ONLY
- 4 -
~115 V AC, 50/60 Hz FUSE: 6.3 A
~230 V AC. 50/60 Hz FUSE: 3.15 A
AC SELECT
POWER CONSUMPTION: 700 W
150 + 150 W RMS@4
100 + 100 W RMS@8
~115 V AC, 50/60 Hz FUSE: 6.3 A
~230 V AC. 50/60 Hz FUSE: 3.15 A
AC SELECT
POWER CONSUMPTION: 700 W
200 W RMS@8
Publicité
