Publicité
UNIT DIAGRAM AND OPERATION
1. Power
Connect the power adapter to turn on the unit To power off or reboot, press and
hold the power button for 3 seconds A short press will turn off/on the screen without
powering down the frame
2. Reset
Use a needle or paperclip to reset the unit
3. USB
Connect a USB flash drive via an OTG cable (not included) or a computer for data
transfer This port can import and export photos and play them directly from the USB
drive
4. Micro SD
Insert a microSD card here for additional photo storage and transfer
5. DC
Connect the DC adapter here to power the device
6. Wall Mounting
Use the provided screw to mount the frame on the wall, either portrait or landscape
4
Publicité
