Publicité
V1.0
5.
Always use safety straps to securely fasten the ramp to the vehicle.
Straps will help to prevent the ramp from slipping off the vehicle.
6.
Do not exceed the ramp' s maximum weight capacity.
7.
Avoid of dynamic loading. Sudden load movement may exceed the load
capacity and break the ramp.
8.
Engage the vehicle' s parking brake, place chocks under the wheels and
turn the engine off while loading or unloading.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing
part before operating. Failure to do so could result in a malfunction and
personal injury.
Remove the parts and accessories from the packaging and inspect for damage. Make
sure that all items in the contents are included.
Contents:
• Ramp
ASSEMBLY & INSTALLATION
1.
Park the carrying vehicle or trailer on a flat surface capable of supporting
the load. Engage the parking brake and turn the engine off.
2.
Remove the tailgate from a pickup truck for safety.
3.
Place the folded ramp on the left side of the truck or trailer bed, making
sure the tips have a solid contact with the bed.
4.
Unfold the ramp to the right. The tips for each section should also have a
solid contact with the bed.
5.
Secure the sides of the ramp with the safety straps. Wrap each strap
around a rung. Slide the hook through the strap' s loop and tighten it.
5.1 Place each hook on a solid part of the vehicle' s frame.
5.2 Tighten each strap to secure the ramp. Test the ramp by pulling
backward on it. Ensure the safety straps do not allow rearward
movement.
6.
Clean the ramp' s surface of dirt and oil. Dry the ramp to eliminate a slick
surface.
Visit www.princessauto.com for more information
Tri-fold aluminum snowmobile ramp
• S-Hook tie down
8882565
5
Publicité
