Publicité
8882565
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear protective clothing designed for the work environment and tool.
3.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
4.
Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Do not overreach when operating the tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from repeated
use) replace strict adherence to the tool safety rules. If you use this tool unsafely
or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2.
Do not use the tool if any parts are damaged, broken or misplaced. Repair
or replace the parts.
3.
Remove a pick-up truck' s tailgate before placing the ramp in position. The
tailgate may fail under the load' s weight, causing the load to fall, resulting
a serious injury.
4.
The ramp' s maximum installed height must not exceed 30 inches as the
incline is too steep to safely load or unload a machine.
4
Tri-fold aluminum snowmobile ramp
For technical questions call 1-800-665-8685
V1.0
Publicité
