Brushless motor hair dryer Use instructions
Cleaning
The hairdryer is equipped with a self-cleaning system for the air inlet grill. To turn it on, turn off the hairdryer
and press the speed selector button for a few seconds. After a few seconds of regular air flow, the fan will
automatically rotate in reverse to deeply clean the filter.
Before cleaning the outside of the appliance, unplug the hair dryer from the socket and allow it to cool down.
The appliance can be cleaned with a soft cloth slightly moistened with warm water. Do not clean the appliance
with thinners, detergents or similar; these could damage the appliance. It is advisable to clean regularly the
filter from deposited hair and dust.Store the device and keep it in a dry place.
Technical data
Power: 1800W
Power supply: 220-240V~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), re-
quires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the reco-
very and recycling of the materials they contain, and reduce the impact on human health and the
environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation,
that when you dispose of the appliance, it must be separately collected.
11
EN