Publicité
Remote Control Pairing
The remote control is paired with the adjustable bed before delivery. If you find that the keys on the remote control
are invalid, or if you replace the remote control, please re-pair according to the following steps.
1. Unplug the power supply, and then power on after the indicator light of the adapter is off. Within 10 seconds after the whole
bed is powered on, press and hold "
2. The backlight of the remote control flashes to indicate that it has entered the code pairing state, and then turns off as the
code is successfully paired, otherwise it will keep flashing.
3. After successfully pairing the code, click the "FLAT" button to reset the bed: after it is completely flat, the remote control can
be used normally.
1
Unplug the power, make sure the adapter light is off
" and "
" at the same time
2
plug in
Press and hold "
" and "
3
the same time within 10 seconds
" at
11
Publicité
