Publicité
Remote Control Functional Specification
Memory position function:
First adjust the bed to the angle that needs to be memorized,
and then set it as shown in the figure below.
a. Press and hold "Read"
for 5 seconds, the backlight
will flash 3 times, and save
this memory position.
Child lock function:
a. Simultaneously press and hold "
the backlight flashes 3 times and then stays on, indicating that
the child lock is on; the button function is not available when
the child lock is on, and the backlight flashes 2 times when
any button is used.
b. Press and hold "Stop Snoring"
for 5 seconds, the backlight will
flash 3 times, and save this
memory position.
" + "
" for 3 seconds,
Reset function:
a. Press and hold "ZG" + "FLAT" for 5 seconds
at the same time, the backlight will flash 3 times,
and all functions will be restored to factory.
b. Press and hold "
" + "
backlight will flash 2 times first, and then turn off after 3 flashes,
indicating that the child lock is off and the button function will resume.
" at the same time for 3 seconds, the
10
Publicité
