Publicité
Hanging Bar Assembly Installation
Place the top grid clips on top of the wire grid with the threaded rod facing down through the
1
wire grid sections. These should be placed where you will be installing the vertical drop bars of the
drop bar assembly.
Fasten the bottom grid clips and the drop bar C-channels to the bottom side of the wire grid. The
2
bottom grid clips should be orientated perpendicular to the top grid clips.
Fasten the hanging clothes bar to the vertical drop bars using one 1/4-20 Lock Nut, two Washers,
3
and one 1/4-20x0.75in Hex Bolt.
Note:
Install grid clip on top layer of
wires, not bottom wires.
Warning:
Do not overtighten drop
bars to grid clips.
9
Publicité
