Publicité
Hanging Hook Installation
Center Installation:
Note:
Please refer to page 7 if you are installing
on a 2x8ft or 2x4ft Pro Wall Mounted Shelf.
1
From the bottom of the overhead rack,
determine location for utility hook to be
installed; slide the folded end with bolt
holes of the hook up through the
opening in the wire grid.
2
Slide the folded end with bolt holes of
the hook onto the wire grid.
Screw in the 1/4-20x0.75in Hex Bolt to
3
secure the utility hook and tighten using a
wrench.
Edge Installation:
Note:
Edge installs can not be accomplished with
the VersaRac Pro or Pro Wall Mounted Shelves.
1
From the top of the overhead rack,
determine location for utility hook to be
installed; slide the folded end with bolt
holes of the hook up through the
opening in the wire grid.
2
Slide the folded end with bolt holes of
the hook onto the wire grid.
Screw in the 1/4-20x0.75in Hex Bolt to
3
secure the utility hook and tighten using a
wrench.
WARNING:
Only install
Accessory Hooks onto initial
securely mounted Overhead
Racks
7
Publicité
