Publicité
Hanging Hook Installation - Continued.
Note:
If installing the Hanging hooks on a 2x8ft or 2x4ft Pro Wall Mounted Shelf, please follow the steps
below. Installation of the Hanging hooks for 2ft deep Pro Wall Mounted Shelves should only be installed in
the orientations , option 1 and 2, shown below.
Option 1 : Install the Hanging Hook above the
wire grid support.
1
From the bottom of the Pro Wall Mounted
Shelf, determine location for utility hook to
be installed; slide the folded end with bolt
holes of the hook up through the
opening in the wire grid.
Screw in the 1/4-20x0.75in Hex Bolt to
3
secure the utility hook and tighten using a
wrench.
8
Option 2 : Install the Hanging Hook as close to
the edge of the wire grid support.
2
Slide the folded end with bolt holes of
the hook onto the wire grid.
Publicité
